Show simple item record

dc.contributor.authorThomas B. Stoughton
dc.date.accessioned2017-05-09T00:05:00Z
dc.date.available2017-05-09T00:05:00Z
dc.date.copyrightOctober, 2001
dc.date.issued2001
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-27024#417_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/125273
dc.description.abstractA strain-based forming limit criterion is widely used throughout the sheet-metal forming industry to gauge the stability of the deformed material with respect to the development of a localized neck prior to fracture. This criterion is strictly valid only when the strain path is linear throughout the deformation process. There is significant data that shows a strong and complex dependence of the limit criterion on the strain path. Unfortunately, the strain path is never linear in secondary forming and hydro-forming processes. Furthermore, the path is often found to be nonlinear in localized critical areas in the first draw die. Therefore, the conventional practice of using a path-independent strain-based forming limit criterion often leads to erroneous assessments of forming severity. Recently it has been reported that a stress-based forming limit criterion appears to exhibit no strain-path dependencies. Subsequently, it has been suggested that this effect is not real, but is due to the saturation of the stress-strain relation. This paper will review and compare the strain-based and stress-based forming limit criteria, looking at a number of factors that are involved in the definition of the stress-based forming limit, including the role of the stress-strain relation.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleStress-Based Forming Limits in Sheet-Metal Forming
dc.typeJournal Paper
dc.journal.volume123
dc.journal.issue4
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.1398083
dc.journal.fristpage417
dc.journal.lastpage422
dc.identifier.eissn1528-8889
dc.keywordsStress
dc.keywordsSheet metal work AND Stress-strain relations
dc.treeJournal of Engineering Materials and Technology:;2001:;volume( 123 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record