Show simple item record

dc.contributor.authorK. M. Zhao
dc.contributor.authorJ. K. Lee
dc.date.accessioned2017-05-09T00:04:59Z
dc.date.available2017-05-09T00:04:59Z
dc.date.copyrightOctober, 2001
dc.date.issued2001
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-27024#391_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/125269
dc.description.abstractThe main objective of this paper is to obtain the first few stress-strain loops of sheet metals from reverse loading so that the springback can be simulated accurately. Material parameters are identified by an inverse method within a selected constitutive model that represents the hardening behavior of materials subjected to a cyclic loading. Three-point bending tests are conducted on sheet steels (mild steel and high strength steel). Punch stroke, punch load, bending strain, and bending angle are measured directly during the tests. Bending moments are then computed from these measured data. Bending moments are also calculated based on a constitutive model. Normal anisotropy and nonlinear isotropic/kinematic hardening are considered. Material parameters are identified by minimizing the normalized error between two bending moments. Micro-genetic algorithm is used in the optimization procedure. Stress-strain curves are generated with the material parameters found in this way, which can be used with other plastic models.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleGeneration of Cyclic Stress-Strain Curves for Sheet Metals
dc.typeJournal Paper
dc.journal.volume123
dc.journal.issue4
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.1395021
dc.journal.fristpage391
dc.journal.lastpage397
dc.identifier.eissn1528-8889
dc.keywordsSheet metal
dc.keywordsStress
dc.keywordsHardening
dc.keywordsStress-strain curves
dc.keywordsOptimization
dc.keywordsAnisotropy AND Constitutive equations
dc.treeJournal of Engineering Materials and Technology:;2001:;volume( 123 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record