Show simple item record

dc.contributor.authorH.-M. Huang
dc.contributor.authorS. Jiang
dc.contributor.authorS.-D. Liu
dc.date.accessioned2017-05-09T00:04:59Z
dc.date.available2017-05-09T00:04:59Z
dc.date.copyrightOctober, 2001
dc.date.issued2001
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-27024#384_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/125268
dc.description.abstractA drawbead model with sheet metal passing through multiple bending-unbending processes was employed in this study to understand the springback phenomenon and to develop a numerical simulation technique for more accurate prediction of the springback process. The deformation process is simulated using an implicit finite element modeling code. The predicted results were compared with the physically measured ones, including clamping and restraining forces, thickness strains, and the curvatures of the deformed sheets. Consideration of the Bauschinger effect and employment of a combined isotropic and kinematic hardening models greatly improve the prediction accuracy. Stress and strain histories under various conditions during the drawing process are studied in detail in an attempt to provide a better basis for comparison for dynamic explicit solutions.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleStress and Strain Histories of Multiple Bending-Unbending Springback Process
dc.typeJournal Paper
dc.journal.volume123
dc.journal.issue4
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.1395574
dc.journal.fristpage384
dc.journal.lastpage390
dc.identifier.eissn1528-8889
dc.keywordsStress
dc.keywordsHardening
dc.keywordsThickness
dc.keywordsForce
dc.keywordsDeformation AND Sheet metal
dc.treeJournal of Engineering Materials and Technology:;2001:;volume( 123 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record