Show simple item record

dc.contributor.authorH. Wang
dc.contributor.authorD. Vedapuri
dc.contributor.authorJ. Y. Cai
dc.contributor.authorT. Hong
dc.contributor.authorW. P. Jepson
dc.date.accessioned2017-05-09T00:04:40Z
dc.date.available2017-05-09T00:04:40Z
dc.date.copyrightJune, 2001
dc.date.issued2001
dc.identifier.issn0195-0738
dc.identifier.otherJERTD2-26495#144_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/125099
dc.description.abstractMass transfer studies in oil-containing multiphase flow provide fundamental knowledge towards the understanding of hydrodynamics and the subsequent effect on corrosion in pipelines. Mass transfer coefficient measurements in two-phase (oil/ferri-ferrocyanide) and three-phase (oil/ferri-ferrocyanide/nitrogen) flow using limiting current density technique were made in 10-cm-dia pipe at 25 and 75 percent oil percentage. Mass transfer coefficients in full pipe oil/water flow and slug flow were studied. A relationship is developed between the average mass transfer coefficient in full pipe flow and slug flow. The mass transfer coefficient decreased with a decrease of in-situ water cut. This was due to the existence of oil phase, which decreased the ionic mass transfer diffusion coefficient.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleMass Transfer Coefficient Measurement in Water/Oil/Gas Multiphase Flow
dc.typeJournal Paper
dc.journal.volume123
dc.journal.issue2
dc.journal.titleJournal of Energy Resources Technology
dc.identifier.doi10.1115/1.1368121
dc.journal.fristpage144
dc.journal.lastpage149
dc.identifier.eissn1528-8994
dc.keywordsFlow (Dynamics)
dc.keywordsMass transfer
dc.keywordsMultiphase flow
dc.keywordsPipe flow
dc.keywordsPipes
dc.keywordsSlug AND Water
dc.treeJournal of Energy Resources Technology:;2001:;volume( 123 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record