Show simple item record

dc.contributor.authorM. A. Elsayed
dc.contributor.authorL. F. Washington
dc.date.accessioned2017-05-09T00:04:40Z
dc.date.available2017-05-09T00:04:40Z
dc.date.copyrightJune, 2001
dc.date.issued2001
dc.identifier.issn0195-0738
dc.identifier.otherJERTD2-26495#138_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/125098
dc.description.abstractPrevious research in stability of drillstrings was based on the assumption of constant material specific force, i.e., a bit force that is proportional to the area of cut. Moreover, earlier work used a simplified bit model that consisted of planar radial blades. In this paper, correlation between the material specific force and area of cut is obtained for Sierra White granite and Berea sandstone from test data developed at Sandia National Laboratories in Albuquerque, NM. These correlations, together with an improved bit model in which cylindrical cutters are arrayed in an overlapping pattern over a flat surface, are used to obtain the stability equations. Laboratory testing shows good correlation between measured bit vibrations and relative instability as predicted by the stability equations. These results are useful in predicting the appropriate operating conditions for stable drilling and serve as a basis for future development of more accurate models of PDC bits.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleDrillstring Stability Based on Variable Material Specific Force and Using a Sharp Three-Insert Polycrystalline Diamond Compact (PDC) Coring Bit
dc.typeJournal Paper
dc.journal.volume123
dc.journal.issue2
dc.journal.titleJournal of Energy Resources Technology
dc.identifier.doi10.1115/1.1367857
dc.journal.fristpage138
dc.journal.lastpage143
dc.identifier.eissn1528-8994
dc.keywordsForce
dc.keywordsStability
dc.keywordsEquations AND Vibration
dc.treeJournal of Energy Resources Technology:;2001:;volume( 123 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record