Show simple item record

dc.contributor.authorAbdennour C. Seibi
dc.date.accessioned2017-05-09T00:04:40Z
dc.date.available2017-05-09T00:04:40Z
dc.date.copyrightJune, 2001
dc.date.issued2001
dc.identifier.issn0195-0738
dc.identifier.otherJERTD2-26495#133_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/125097
dc.description.abstractThis paper presents a novel approach to measure and estimate running force for various laboratory and field conditions. The experimental and simulation procedures of different rod/pipe sizes running through various laboratory/field conditions are described in detail. Tests were conducted on rods to measure the running force for various laboratory cases obtained from dimensional analysis. The generated experimental results were used to calibrate a typical laboratory finite element model from which calibrated parameters are used to estimate the running force for prescribed field cases. Both the experimental and simulated field results revealed that the running force depends on the radius of curvature, hole clearance, horizontal section, and contact scenario significantly. Stress analysis of pipes running through curved and horizontal sections showed that pipes undergo elastic and plastic deformation, and the nature of deformation depends on the pipe size and radius of curvature.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleRunning Force in Medium to High-Curvature Wellbores: An Experimental Study and Numerical Simulation of Laboratory and Field Cases
dc.typeJournal Paper
dc.journal.volume123
dc.journal.issue2
dc.journal.titleJournal of Energy Resources Technology
dc.identifier.doi10.1115/1.1365157
dc.journal.fristpage133
dc.journal.lastpage137
dc.identifier.eissn1528-8994
dc.keywordsForce
dc.keywordsPipes
dc.keywordsComputer simulation
dc.keywordsFinite element analysis
dc.keywordsFinite element model AND Rods
dc.treeJournal of Energy Resources Technology:;2001:;volume( 123 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record