Show simple item record

dc.contributor.authorY. T. Kang
dc.contributor.authorY. Fujita
dc.contributor.authorT. Kashiwagi
dc.date.accessioned2017-05-09T00:04:40Z
dc.date.available2017-05-09T00:04:40Z
dc.date.copyrightSeptember, 2001
dc.date.issued2001
dc.identifier.issn0195-0738
dc.identifier.otherJERTD2-26496#242_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/125093
dc.description.abstractExperiments were conducted for ammonia-water falling film absorption in a plate heat exchanger with offset strip fins. The objectives of this paper were to analyze combined heat and mass transfer during the ammonia-water absorption process under different inlet subcooling modes, and to obtain heat transfer coefficients (Nusselt number). This paper examined the effects of the inlet subcooling modes, the inlet concentration difference, liquid Reynolds number, and vapor Reynolds number on the heat transfer performance. Inlet liquid concentrations were set at 0, 5, 10, and 15 percent in mass of ammonia, while inlet vapor concentration ranged from 64.7 to 83.6 percent. Experiments were conducted in three ways according to the inlet subcooling conditions, i.e., Case A (Tv>Tl), Case B (Tv∼Tl), and Case C (Tv<Tl). In Case A, there was a rectification process at the top of the test section by the inlet subcooling effect. Water desorption was confirmed in the experiments, which resulted in a lower absorption performance. The heat transfer coefficient increased as the inlet subcooling increased in all cases. The effect of inlet subcooling on heat transfer performance was more significant in Case A than in Cases B and C. The inlet subcooling had more significant effect on the heat transfer performance than the inlet concentration difference. Nusselt number increased as liquid and vapor Reynolds numbers increased. The vapor velocity should be maximized to increase absorption performance in cocurrent ammonia-water absorption process. The parametric analysis provides fundamental understandings of the ammonia-water absorption process, and thus gives a guideline for heat exchanger compactness in ammonia-water absorption systems.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleCombined Heat and Mass Transfer Under Different Inlet Subcooling Modes During NH3-H2O Falling Film Absorption Process
dc.typeJournal Paper
dc.journal.volume123
dc.journal.issue3
dc.journal.titleJournal of Energy Resources Technology
dc.identifier.doi10.1115/1.1377895
dc.journal.fristpage242
dc.journal.lastpage249
dc.identifier.eissn1528-8994
dc.keywordsHeat
dc.keywordsMass transfer
dc.keywordsHeat transfer
dc.keywordsVapors
dc.keywordsAbsorption
dc.keywordsSubcooling
dc.keywordsWater
dc.keywordsHeat transfer coefficients
dc.keywordsCoolants
dc.keywordsFlow (Dynamics) AND Heat exchangers
dc.treeJournal of Energy Resources Technology:;2001:;volume( 123 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record