Show simple item record

dc.contributor.authorGerhard Löffler
dc.contributor.authorDietmar Andahazy
dc.contributor.authorChristian Wartha
dc.contributor.authorFranz Winter
dc.contributor.authorHermann Hofbauer
dc.date.accessioned2017-05-09T00:04:40Z
dc.date.available2017-05-09T00:04:40Z
dc.date.copyrightSeptember, 2001
dc.date.issued2001
dc.identifier.issn0195-0738
dc.identifier.otherJERTD2-26496#228_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/125091
dc.description.abstractNOx (i.e., NO and NO2) and N2O are known as harmful pollutants. In fluidized bed combustion these are formed from the nitrogen in the fuel. To develop effective primary measures reducing the emissions, more knowledge on the mechanism of formation and destruction ongoing in fluidized beds has to be obtained. In this work, a detailed chemistry model is combined with a two-phase model for a stationary fluidized bed to calculate the emissions of a single fuel particle in a laboratory-scale stationary fluidized bed. The single particle model consists of a simple model for the H2O release during drying, a model for the volatiles composition, and a model for the nitrogen chemistry during char combustion. The detailed reaction mechanism consists of a homogeneous part, heterogeneously catalyzed reactions on the bed material, and radical recombination reactions on the solids’ surface. The results confirm that devolatilization and char combustion are of nearly equal importance for NO and N2O formation. During devolatilization, NO is formed from HCN and NH3, while N2O is formed almost exclusively from HCN. During char combustion, NO is mostly formed by heterogeneous oxidation of char nitrogen, while N2O is formed from homogeneous oxidation of HCN. On the other hand, there is also a back coupling of NO on the homogeneous burnout of the carbon containing species, by sensitizing the oxidation of CH4.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleNOx and N2O Formation Mechanisms—A Detailed Chemical Kinetic Modeling Study on a Single Fuel Particle in a Laboratory-Scale Fluidized Bed
dc.typeJournal Paper
dc.journal.volume123
dc.journal.issue3
dc.journal.titleJournal of Energy Resources Technology
dc.identifier.doi10.1115/1.1383973
dc.journal.fristpage228
dc.journal.lastpage235
dc.identifier.eissn1528-8994
dc.keywordsTemperature
dc.keywordsCombustion
dc.keywordsParticulate matter
dc.keywordsFuels
dc.keywordsModeling
dc.keywordsFluidized beds
dc.keywordsNitrogen
dc.keywordsMechanisms
dc.keywordsoxidation
dc.keywordsDrying
dc.keywordsEmissions
dc.keywordsCarbon
dc.keywordsNitrogen oxides AND Solids
dc.treeJournal of Energy Resources Technology:;2001:;volume( 123 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record