Show simple item record

dc.contributor.authorGary Zheng
dc.contributor.authorAllen Verret
dc.contributor.authorRetired
dc.contributor.authorNancy Burke
dc.contributor.authorNeal Prescott
dc.contributor.authorDennis Cai
dc.contributor.authorRavi Perera
dc.date.accessioned2017-05-09T00:04:39Z
dc.date.available2017-05-09T00:04:39Z
dc.date.copyrightDecember, 2001
dc.date.issued2001
dc.identifier.issn0195-0738
dc.identifier.otherJERTD2-26499#285_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/125076
dc.description.abstractAt the Multiphase ’99 Conference in Cannes, France, the authors presented a simple, yet general, formulation for effective conductivity of a porous insulation medium under pipeline application using fundamental continuity, momentum, and energy equations Zheng et al., 1999, “Heat Transfer in a Porous Insulation Medium in a Subsea Bundled Pipeline,” Paper No. 48 presented at Multiphase ’99, Cannes, France, ©BRH Group 1999. The effective conductivity was shown as a function of Darcy-modified Raleigh number only. The coefficients in the equation were then obtained from a set of tests for a simple pipe-in-pipe bundle with half-shell pieces of foam fitted around the inner pipe. Dramatic heat losses as experienced in some of field applications were recorded when the porous insulation foam is under high nitrogen pressure. All the heat losses were attributed to the increased heat convection within the porous insulation medium. Recognizing loose spaces between half-shells may contribute to the dramatic heat losses, the authors from R. J. Brown Deepwater conducted a new set of tests that used the same open-cell foam material, but with foamed-in-place application on the inner pipe wall. The new test data are used in this paper to derive an updated set of coefficients for the effective conductivity formulation. It is shown that such a foamed-in-place open-cell foam system maintains insulation effectiveness, even under high application pressures.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleAn Update on Heat Transfer in a Porous Insulation Medium in a Subsea Bundled Pipeline
dc.typeJournal Paper
dc.journal.volume123
dc.journal.issue4
dc.journal.titleJournal of Energy Resources Technology
dc.identifier.doi10.1115/1.1413772
dc.journal.fristpage285
dc.journal.lastpage290
dc.identifier.eissn1528-8994
dc.keywordsHeat transfer
dc.keywordsPipes
dc.keywordsInsulation
dc.keywordsEquations
dc.keywordsPipelines
dc.keywordsOcean engineering
dc.keywordsHeat losses
dc.keywordsAnnulus AND Pressure
dc.treeJournal of Energy Resources Technology:;2001:;volume( 123 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record