Show simple item record

dc.contributor.authorYunhe Yu
dc.contributor.authorGraduate Assistant
dc.contributor.authorRao V. Dukkipati
dc.contributor.authorSaravanan M. Peelamedu
dc.contributor.authorResearch Assistant
dc.contributor.authorNagi G. Naganathan
dc.contributor.authorProfessor and Chairman
dc.date.accessioned2017-05-09T00:04:29Z
dc.date.available2017-05-09T00:04:29Z
dc.date.copyrightJune, 2001
dc.date.issued2001
dc.identifier.issn0022-0434
dc.identifier.otherJDSMAA-26282#186_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/124970
dc.description.abstractThis study divided into three portions to provide performance requirements; overview and development of various engine mounts; and the optimization of engine mount systems. The first part provides an insight about the ideal engine mount system that should isolate vibration caused by engine disturbance force in various speed range and prevent engine bounce from shock excitation. This implies that the dynamic stiffness and damping of the engine mount should be frequency and amplitude dependent. Therefore, the development of engine mounting systems has mostly concentrated on improvement of frequency and amplitude dependent properties. The second part starts discussion on the conventional elastomeric mounts that offer a trade-off between static deflection and vibration isolation. The next level, passive hydraulic mounts can provide a better performance than elastomeric mounts especially in the low frequency range. Subsequently, semi-active and active techniques are used to improve performance of hydraulic mounts by making them more tunable. The active engine mounting system can be very stiff at low frequency and be tuned to be very soft at the higher frequency range to isolate the vibration. The final part is about the optimization of engine mounting systems. An overview of the current work on this optimization shows some limitations. Further study is needed to consider the nonlinearities and variations in properties of different types of mounting systems.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleAutomotive Vehicle Engine Mounting Systems: A Survey
dc.typeJournal Paper
dc.journal.volume123
dc.journal.issue2
dc.journal.titleJournal of Dynamic Systems, Measurement, and Control
dc.identifier.doi10.1115/1.1369361
dc.journal.fristpage186
dc.journal.lastpage194
dc.identifier.eissn1528-9028
dc.keywordsEngines
dc.keywordsDamping
dc.keywordsVibration
dc.keywordsStiffness
dc.keywordsVehicles
dc.keywordsShock (Mechanics)
dc.keywordsForce AND Optimization
dc.treeJournal of Dynamic Systems, Measurement, and Control:;2001:;volume( 123 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record