Show simple item record

dc.contributor.authorSungsoo Rhim
dc.contributor.authorNader Sadegh
dc.contributor.authorWayne J. Book
dc.contributor.authorAi-Ping Hu
dc.date.accessioned2017-05-09T00:04:26Z
dc.date.available2017-05-09T00:04:26Z
dc.date.copyrightSeptember, 2001
dc.date.issued2001
dc.identifier.issn0022-0434
dc.identifier.otherJDSMAA-26286#385_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/124942
dc.description.abstractComand shaping, a feedforward approach used to control flexible manipulators, performs most effectively when applied to a linear system. In practice, various nonlinearities are present in a given system that will deteriorate the performance of command shaping. In this work, a multirate repetitive learning controller (MRLC) is used in conjunction with a command shaping method known as the optimal arbitrary time-delay filter (OATF) for discrete-time joint control of a single flexible link manipulator containing nonlinearities. With very little a priori knowledge of the given system, a MRLC is able to cancel the repetitive tracking errors caused by nonlinearities at select frequencies and thereby achieve near-perfect tracking of a periodic reference trajectory. By doing this, a MRLC controls the joint of the flexible link manipulator to follow a given shaped command more closely, thus allowing the OATF to more effectively attenuate residual manipulator tip vibrations. It is shown both analytically and experimentally that this combined control strategy is more effective than a conventional PID and OATF controller at attenuating residual tip vibrations.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleCombining a Multirate Repetitive Learning Controller With Command Shaping for Improved Flexible Manipulator Control
dc.typeJournal Paper
dc.journal.volume123
dc.journal.issue3
dc.journal.titleJournal of Dynamic Systems, Measurement, and Control
dc.identifier.doi10.1115/1.1387445
dc.journal.fristpage385
dc.journal.lastpage390
dc.identifier.eissn1528-9028
dc.keywordsControl equipment
dc.keywordsTrajectories (Physics)
dc.keywordsVibration
dc.keywordsFlexible manipulators
dc.keywordsManipulators
dc.keywordsErrors
dc.keywordsFrequency
dc.keywordsDisplacement
dc.keywordsDelays
dc.keywordsSampling (Acoustical engineering) AND Filters
dc.treeJournal of Dynamic Systems, Measurement, and Control:;2001:;volume( 123 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record