Show simple item record

dc.contributor.authorEvita Edhi
dc.contributor.authorTetsutaro Hoshi
dc.date.accessioned2017-05-09T00:04:26Z
dc.date.available2017-05-09T00:04:26Z
dc.date.copyrightSeptember, 2001
dc.date.issued2001
dc.identifier.issn0022-0434
dc.identifier.otherJDSMAA-26286#370_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/124940
dc.description.abstractChatter occurring at more than 10,000 Hz frequency was found in fine boring operation, and causing reduced tool life. To identify the mechanism for the onset of high frequency chatter, cutting tests and structural dynamics examination of the boring tool have been performed. Experimental study has revealed that the regenerative effect, the penetration effect, and the X-Y looping of the tool tip are three relevant characteristics in the onset of the chatter. Those findings are included in a new chatter model of which validity is evaluated by computational analysis of energy supplied and dissipated in the vibrating system.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleA New Mechanism Explaining High Frequency Chatter Vibration Involving Tool Tip X-Y Looping in Fine Boring
dc.typeJournal Paper
dc.journal.volume123
dc.journal.issue3
dc.journal.titleJournal of Dynamic Systems, Measurement, and Control
dc.identifier.doi10.1115/1.1387017
dc.journal.fristpage370
dc.journal.lastpage376
dc.identifier.eissn1528-9028
dc.keywordsVibration
dc.keywordsChatter
dc.keywordsCutting
dc.keywordsMechanisms AND Force
dc.treeJournal of Dynamic Systems, Measurement, and Control:;2001:;volume( 123 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record