Show simple item record

dc.contributor.authorA. Nauerz
dc.contributor.authorC.-P. Fritzen
dc.date.accessioned2017-05-09T00:04:24Z
dc.date.available2017-05-09T00:04:24Z
dc.date.copyrightDecember, 2001
dc.date.issued2001
dc.identifier.issn0022-0434
dc.identifier.otherJDSMAA-26291#691_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/124927
dc.description.abstractA damage identification method utilizing an existing computational model and output spectral densities is presented. The problem covered here is the detection, localization and quantification of damage in real vibrating elastomechanical structures. The damages are localized by means of changes in the dynamic characteristics between a reference model and the actual, measured system. The main contribution is that the exact measurement of the input signals is ignored. These signals are assumed to be an ergodic random process, whose statistical properties such as mean and covariances must be estimated. Power spectral densities allow random excitations to be dealt with. The lack of measurement information is treated by means of the dynamic condensation technique and the Kalman Bucy filter technique. In the first case the size of the model matrices are reduced to the number of measured degrees of freedom (dof). In the second procedure the measured responses are expanded to the size of the model matrices. With equally sized measurement and model matrices a linear equation system for the desired parameter changes is derived by using the sensitivity approach. The equation system for this inverse problem is usually ill-conditioned and must be regularized in some way. One possibility is to reduce the subset of parameters to be in error. The algorithm is applied to a beam structure and a measured laboratory structure, a multi story frame, in which artificial damage is introduced by weakening one column between two stories. So, it is shown that the location and the size of the corresponding stiffness decrease can be detected.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleModel Based Damage Identification Using Output Spectral Densities
dc.typeJournal Paper
dc.journal.volume123
dc.journal.issue4
dc.journal.titleJournal of Dynamic Systems, Measurement, and Control
dc.identifier.doi10.1115/1.1410931
dc.journal.fristpage691
dc.journal.lastpage698
dc.identifier.eissn1528-9028
dc.keywordsCondensation
dc.keywordsStructural frames
dc.keywordsAlgorithms
dc.keywordsEquations
dc.keywordsErrors
dc.keywordsFilters
dc.keywordsRandom excitation
dc.keywordsSignals
dc.keywordsStiffness
dc.keywordsInverse problems
dc.keywordsNoise (Sound)
dc.keywordsSpectra (Spectroscopy)
dc.keywordsDegrees of freedom AND Stochastic processes
dc.treeJournal of Dynamic Systems, Measurement, and Control:;2001:;volume( 123 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record