Show simple item record

dc.contributor.authorIouri Balachov
dc.contributor.authorBernhard Stellwag
dc.contributor.authorNorbert Henzel
dc.contributor.authorDigby Macdonald
dc.contributor.authorRenate Kilian
dc.date.accessioned2017-05-09T00:03:18Z
dc.date.available2017-05-09T00:03:18Z
dc.date.copyrightFebruary, 2000
dc.date.issued2000
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28396#45_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/124242
dc.description.abstractOver the past decade, we have developed deterministic models for predicting materials damage due to stress corrosion cracking (SCC) in boiling water reactor (BWR) primary coolant circuits. These steady-state models have been applied to fixed state points of reactor operation to yield electrochemical corrosion potential (ECP) and crack growth rate (CGR) predictions. However, damage is cumulative, so that prediction of the extent of damage at any given time must integrate crack growth rate over the history of the plant. In this paper, we describe the use of the REMAIN code to predict the accumulated damage functions for major components in the coolant circuit of a typical BWR that employs internal coolant pumps. As an example, the effect of relatively small amounts of hydrogen added to the feedwater (e.g., 0.5 ppm) on the development of damage from a 0.197-in. (0.5-cm) intergranular crack located at the exit of an internal pump was analyzed. It is predicted that hydrogen additions to the feedwater will effectively suppress further growth of the crack. We also report the first predictions of the accumulation of damage from SCC for a variable power operating cycle. We predict that the benefits of hydrogen water chemistry (HWC), as indicated by the behavior of a single crack under constant environmental conditions, are significantly muted by changes in reactor power. [S0094-9930(00)01301-9]
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titlePrediction of Materials Damage History From Stress Corrosion Cracking in Boiling Water Reactors
dc.typeJournal Paper
dc.journal.volume122
dc.journal.issue1
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.556148
dc.journal.fristpage45
dc.journal.lastpage49
dc.identifier.eissn1528-8978
dc.keywordsStress corrosion cracking
dc.keywordsCoolants
dc.keywordsFracture (Materials)
dc.keywordsPumps
dc.keywordsBoiling water reactors
dc.keywordsChemistry
dc.keywordsCircuits
dc.keywordsHydrogen
dc.keywordsWater
dc.keywordsIndustrial plants
dc.keywordsFeedwater AND Stress
dc.treeJournal of Pressure Vessel Technology:;2000:;volume( 122 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record