Show simple item record

dc.contributor.authorA. M. Birk
dc.contributor.authorMark. H. Cunningham
dc.date.accessioned2017-05-09T00:03:10Z
dc.date.available2017-05-09T00:03:10Z
dc.date.copyrightNovember, 2000
dc.date.issued2000
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28404#494_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/124187
dc.description.abstractOver time, thermally protected and thermally insulated rail tank-cars may develop insulation deficiencies due to the continuous motion and vibrations. These deficiencies are generally not visible due to the protective outer steel jacket. A research program was undertaken to develop an inspection procedure to identify deficiencies in the thermal insulation. Thermography was selected as the most effective means of inspecting the thermal insulation because it is nondestructive, noncontact, and economical. Thermography takes advantage of the fact that when a temperature difference exits between the contents of the tank car and the ambient conditions, the presence of insulation deficiencies generates temperature gradients on the surface of the tank-car’s outer steel jacket that can then be identified using a thermal imager. A series of laboratory and field tests were conducted to determine under what ambient and tank conditions the inspection procedure is effective. Using a low-cost, uncooled, 8–12-μm waveband thermal imager, it was found that the imager could detect insulation deficiencies under temperature gradient conditions compatible with typical day-night cycle temperature variations. Field tests proved the technique to be practical and also showed that solar heating enhances the inspection procedure under certain conditions. This paper presents the results of the laboratory tests and shows some preliminary field test results. [S0094-9930(00)01104-5]
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleThermographic Inspection of Rail-Car Thermal Insulation
dc.typeJournal Paper
dc.journal.volume122
dc.journal.issue4
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.1310365
dc.journal.fristpage494
dc.journal.lastpage501
dc.identifier.eissn1528-8978
dc.keywordsTemperature
dc.keywordsInspection
dc.keywordsInsulation
dc.keywordsRailway tank cars
dc.keywordsSteel
dc.keywordsTemperature gradients
dc.keywordsThermal insulation AND Shells
dc.treeJournal of Pressure Vessel Technology:;2000:;volume( 122 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record