Show simple item record

dc.contributor.authorLei Zhu
dc.contributor.authorJ. T. Boyle
dc.date.accessioned2017-05-09T00:03:09Z
dc.date.available2017-05-09T00:03:09Z
dc.date.copyrightNovember, 2000
dc.date.issued2000
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28404#443_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/124178
dc.description.abstractThis paper describes how optimal shapes for axisymmetric pressure vessels can be established based on maximizing limit pressure. This type of problem has been rarely examined in the literature due to the difficulty of evaluating limit loads. However, the “elastic compensation method” is used to approximate the limit load using elastic analysis alone, which opens the possibility of studying shape optimization based on limit pressure. The basic procedure, using a commercial finite element analysis system, is described and three example problems are examined. The aim is to investigate how much of an increase in load-carrying capacity could potentially be achieved if nonstandard pressure vessel shapes could be employed in practice. Of course, this may not be possible, but the results described here do contribute to a better understanding of the role shape plays in providing strength to a simple pressure vessel. [S0094-9930(00)00304-8]
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleOptimal Shapes for Axisymmetric Pressure Vessels: A Brief Overview
dc.typeJournal Paper
dc.journal.volume122
dc.journal.issue4
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.1308572
dc.journal.fristpage443
dc.journal.lastpage449
dc.identifier.eissn1528-8978
dc.keywordsPressure
dc.keywordsPressure vessels
dc.keywordsStress
dc.keywordsOptimization
dc.keywordsShapes
dc.keywordsDesign AND Shells
dc.treeJournal of Pressure Vessel Technology:;2000:;volume( 122 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record