Show simple item record

dc.contributor.authorM. Chiarelli
dc.contributor.authorM. Sacchi
dc.contributor.authorEngineer
dc.contributor.authorA. Lanciotti
dc.date.accessioned2017-05-09T00:02:36Z
dc.date.available2017-05-09T00:02:36Z
dc.date.copyrightJanuary, 2000
dc.date.issued2000
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-27003#141_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/123809
dc.description.abstractThe paper describes the results of a research programme, carried out at the Department of Aerospace Engineering of the University of Pisa, for the assessment of the influence of plasma cutting on the physical and mechanical properties of Fe510 D1, a low carbon steel widely used in carpentry. The activity started by observing that several industries rework plasma cut edges, particularly in the case of fatigue structures, in spite of the good quality of the plasma cut edges in a fully automatic process. Obviously, reworking is very expensive and time-consuming. Comparative fatigue tests demonstrated that the fatigue resistance of plasma cut specimens in Fe510 steel was fully comparable to that of milled specimens, as the consequence of the beneficial residual stresses which formed in the plasma cut edges. [S0094-4289(00)02201-5]
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleEffect of Plasma Cutting on the Fatigue Resistance of Fe510 D1 Steel
dc.typeJournal Paper
dc.journal.volume122
dc.journal.issue1
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.482778
dc.journal.fristpage141
dc.journal.lastpage145
dc.identifier.eissn1528-8889
dc.keywordsFatigue
dc.keywordsSteel
dc.keywordsElectrical resistance
dc.keywordsPlasma arc cutting
dc.keywordsPlasmas (Ionized gases)
dc.keywordsFatigue testing
dc.keywordsStress AND Residual stresses
dc.treeJournal of Engineering Materials and Technology:;2000:;volume( 122 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record