Show simple item record

dc.contributor.authorWeili Cheng
dc.date.accessioned2017-05-09T00:02:36Z
dc.date.available2017-05-09T00:02:36Z
dc.date.copyrightJanuary, 2000
dc.date.issued2000
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-27003#135_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/123808
dc.description.abstractTraditionally, the unknown variables to be estimated in residual stress measurement are based on the approximation of the stresses. In this paper an alternative approach is presented, in which the initial strain is used as the unknown variable to be estimated in the measurement. A useful feature of the approach is that it does not require the measurement to be made on the original part if the stress is uniform in the axial direction. Instead, the original residual stress can be computed once the initial strains are obtained from a specimen removed from the original part. This approach is incorporated into two recently developed methods: the crack compliance method and the single-slice method for measurement of the axial stress in plane strain. Experimental validation shows that the approach based on initial strains leads to a result that agrees very well with the analytical prediction. [S0094-4289(00)02101-0]
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleMeasurement of the Axial Residual Stresses Using the Initial Strain Approach
dc.typeJournal Paper
dc.journal.volume122
dc.journal.issue1
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.482777
dc.journal.fristpage135
dc.journal.lastpage140
dc.identifier.eissn1528-8889
dc.keywordsResidual stresses
dc.keywordsStress
dc.keywordsFracture (Materials)
dc.keywordsStress concentration
dc.keywordsApproximation AND Deformation
dc.treeJournal of Engineering Materials and Technology:;2000:;volume( 122 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record