Show simple item record

dc.contributor.authorI. W. Park
dc.contributor.authorD. A. Dornfeld
dc.date.accessioned2017-05-09T00:02:34Z
dc.date.available2017-05-09T00:02:34Z
dc.date.copyrightApril, 2000
dc.date.issued2000
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-27007#229_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/123784
dc.description.abstractFinite element models in orthogonal cutting are presented in order to examine the influences of exit angles of the workpiece, tool rake angles, and backup materials on burr formation processes in 304 L stainless steel in particular. Based on the metal-cutting simulation procedure proposed by the authors, a series of stress and strain contours and final burr/breakout configurations are obtained. The burr formation mechanisms with respect to five different exit angles are found, and duration of the burr formation process increases with an increase of exit angle, resulting in different burr/breakout configurations. Based on the development of negative shear stress in front of the tool tip, the tool tip damage, what is called “chipping,” is investigated. Also, with fixed cutting conditions and workpiece exit geometry, the influence of the rake angle is found to be closely related to the rate of plastic work in steady-state cutting because the larger the rate of plastic work in steady-state cutting, the earlier the burr initiation commences. Furthermore, in order to effectively minimize the burr size, three cases of backup material influences on burr formation processes are examined. It is found that the burr size can be effectively minimized when the backup material supports the workpiece only up to the predefined machined surface. [S0094-4289(00)01402-X]
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleA Study of Burr Formation Processes Using the Finite Element Method: Part II—The Influences of Exit Angle, Rake Angle, and Backup Material on Burr Formation Processes
dc.typeJournal Paper
dc.journal.volume122
dc.journal.issue2
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.482792
dc.journal.fristpage229
dc.journal.lastpage237
dc.identifier.eissn1528-8889
dc.keywordsDeformation
dc.keywordsMetal cutting
dc.keywordsSimulation
dc.keywordsStress
dc.keywordsShear (Mechanics)
dc.keywordsFinite element methods
dc.keywordsFinite element analysis
dc.keywordsFracture (Process)
dc.keywordsCutting
dc.keywordsFinite element model
dc.keywordsGeometry
dc.keywordsSteady state
dc.keywordsMechanisms
dc.keywordsMaterials properties
dc.keywordsStainless steel AND Shock (Mechanics)
dc.treeJournal of Engineering Materials and Technology:;2000:;volume( 122 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record