Show simple item record

dc.contributor.authorZ. Wu
dc.contributor.authorJ. Lu
dc.contributor.authorPh.D. Student. Professor. Mem. ASME
dc.date.accessioned2017-05-09T00:02:34Z
dc.date.available2017-05-09T00:02:34Z
dc.date.copyrightApril, 2000
dc.date.issued2000
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-27007#215_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/123782
dc.description.abstractA method combining moiré interferometry, Twyman–Green interferometry, and blind hole drilling method is proposed for simple and accurate determination of residual stress. The relationship between the three-dimensional surface displacements produced by introducing a blind hole and the corresponding residual stress is established by employing the Fourier expansion solution containing a set of undetermined coefficients. The coefficients are calibrated by 3D finite element method. The surface in-plane displacements Ux,Uy, and the out-of-plane displacement Uz produced by the relaxation of residual stress are measured by moiré interferometry and Twyman–Green interferometry, respectively, after the hole-drilling procedure. The complete three-dimensional displacement data at any single point around the hole can be used for residual stress determination. The accuracy of the method is analyzed and the experimental procedure is described to determine the sign of residual stresses. As an implementation of the method, a shot peening residual stress problem is studied. [S0094-4289(00)00802-1]
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleStudy of Surface Residual Stress by Three-Dimensional Displacement Data at a Single Point in Hole Drilling Method
dc.typeJournal Paper
dc.journal.volume122
dc.journal.issue2
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.482790
dc.journal.fristpage215
dc.journal.lastpage220
dc.identifier.eissn1528-8889
dc.keywordsDrilling
dc.keywordsStress
dc.keywordsDisplacement
dc.keywordsInterferometry AND Calibration
dc.treeJournal of Engineering Materials and Technology:;2000:;volume( 122 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record