Show simple item record

dc.contributor.authorChuwei Zhou
dc.contributor.authorWei Yang
dc.contributor.authorDaining Fang
dc.date.accessioned2017-05-09T00:02:34Z
dc.date.available2017-05-09T00:02:34Z
dc.date.copyrightApril, 2000
dc.date.issued2000
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-27007#203_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/123780
dc.description.abstractMechanical properties and damage evolution of short-fiber-reinforced metal matrix composites (MMC) are studied under a micromechanics model accounting for the history of cooling and thermal cycling. A cohesive interface is formulated in conjunction with the Gurson-Tvergaard matrix damage model. Attention is focused on the residual stresses and damages by the thermal mismatch. Substantial stress drop in the uniaxial tensile response is found for a computational cell that experienced a cooling process. The stress drop is caused by debonding along the fiber ends. Subsequent thermal cycling lowers the debonding stress and the debonding strain. Micromechanics analysis reveals three failure modes. When the thermal histories are ignored, the cell fails by matrix damage outside the fiber ends. With the incorporation of cooling, the cell fails by fiber end debonding and the subsequent transverse matrix damage. When thermal cycling is also included, the cell fails by jagged debonding around the fiber tops followed by necking instability of matrix ligaments. [S0094-4289(00)01202-0]
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleDamage of Short-Fiber-Reinforced Metal Matrix Composites Considering Cooling and Thermal Cycling
dc.typeJournal Paper
dc.journal.volume122
dc.journal.issue2
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.482788
dc.journal.fristpage203
dc.journal.lastpage208
dc.identifier.eissn1528-8889
dc.keywordsCooling
dc.keywordsFibers
dc.keywordsMetal matrix composites
dc.keywordsStress
dc.keywordsFailure AND Temperature
dc.treeJournal of Engineering Materials and Technology:;2000:;volume( 122 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record