| dc.contributor.author | I. Schäffler | |
| dc.contributor.author | P. Delobelle | |
| dc.contributor.author | P. Geyer | |
| dc.contributor.author | P. Bouffioux | |
| dc.date.accessioned | 2017-05-09T00:02:33Z | |
| dc.date.available | 2017-05-09T00:02:33Z | |
| dc.date.copyright | April, 2000 | |
| dc.date.issued | 2000 | |
| dc.identifier.issn | 0094-4289 | |
| dc.identifier.other | JEMTA8-27007#168_1.pdf | |
| dc.identifier.uri | http://yetl.yabesh.ir/yetl/handle/yetl/123774 | |
| dc.description.abstract | This paper first describes the effect of neutron irradiation on the thermomechanical behavior of stress-relieved Zircaloy-4 fuel tubes that have been analyzed after exposure to five different fluences ranging from nonirradiated material to high burnup. In the second part, a viscoplastic model is proposed to simulate, for different isotherms, 350°C<T<400°C, out-of-flux anisotropic mechanical behavior of the cladding tubes over the fluence range 0<ϕ<100⋅1024 nm−2 (E>1 MeV). The model, identified for tests conducted at 350°C, has been validated from tests made at 380°C and 400°C. The model is capable of simulating strain hardening under internal pressure followed by a stress relaxation period, the loading producing an interaction between the pellet and cladding. Introduction of a state variable characterizing the damage caused by a bombardment with neutrons into the model has allowed us to simulate the irradiation-induced hardening and creep rate decrease, as well as the saturation noticed after two cycles of irradiation (≅45⋅1024 nm−2 (E>1 MeV)) in a pressurized water reactor (PWR). Finally, the numerical simulations show the model is able to reproduce the totality of the thermomechanical experiments. [S0094-4289(00)00202-4] | |
| dc.publisher | The American Society of Mechanical Engineers (ASME) | |
| dc.title | Thermomechanical Behavior and Modeling Between 350°C and 400°C of Zircaloy-4 Cladding Tubes From an Unirradiated State to High Fluence (0 to 85⋅1024 nm−2,E>1 MeV) | |
| dc.type | Journal Paper | |
| dc.journal.volume | 122 | |
| dc.journal.issue | 2 | |
| dc.journal.title | Journal of Engineering Materials and Technology | |
| dc.identifier.doi | 10.1115/1.482783 | |
| dc.journal.fristpage | 168 | |
| dc.journal.lastpage | 176 | |
| dc.identifier.eissn | 1528-8889 | |
| dc.keywords | Creep | |
| dc.keywords | Temperature | |
| dc.keywords | Irradiation (Radiation exposure) | |
| dc.keywords | Stress | |
| dc.keywords | Hardening | |
| dc.keywords | Cladding systems (Building) | |
| dc.keywords | Fluence (Radiation measurement) | |
| dc.keywords | Pressurized water reactors | |
| dc.keywords | Modeling | |
| dc.keywords | Work hardening | |
| dc.keywords | Cycles | |
| dc.keywords | Mechanical behavior | |
| dc.keywords | Relaxation (Physics) AND Pressure | |
| dc.tree | Journal of Engineering Materials and Technology:;2000:;volume( 122 ):;issue: 002 | |
| dc.contenttype | Fulltext | |