Show simple item record

dc.contributor.authorJ. E. Indacochea
dc.contributor.authorR. Seshadri
dc.contributor.authorY. K. Oh
dc.contributor.authorG. Wang
dc.date.accessioned2017-05-09T00:02:32Z
dc.date.available2017-05-09T00:02:32Z
dc.date.copyrightJuly, 2000
dc.date.issued2000
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-27009#259_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/123751
dc.description.abstractWelded high-temperature power plant components can experience a greater risk of failure by creep during service, when compared to similar as-wrought components. The heat-affected zone (HAZ) of alloy steels is usually the region of a weldment exhibiting poor mechanical properties. The arc welding of an ASTM A470, Class 8-rotor steel in this study identified the intercritical heat affected zone (ICHAZ) as the weakest region in terms of creep rupture life. The type of welding procedure significantly affects this region, but most important are the welding parameters utilized. Because of the microstructural heterogeneity of the HAZ and sensitivity of these microstructures to changes when exposed to elevated temperatures, their performance at later times is difficult to predict. Extrapolation techniques are limited in value for predicting service lives of homogeneous materials, because these do not incorporate the microstructure changes of the materials during high temperature operation. They are even less useful for predicting the operating lives of weldments. This paper considers the creep performance and structure stability of the ICHAZ of 12 percent Cr and 214-1Mo vanadium modified weldments produced on a retired CrMoV rotor steel. [S0094-4289(00)00303-0]
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleCreep Rupture Properties of High-Temperature Bainitic Steels After Weld Repair
dc.typeJournal Paper
dc.journal.volume122
dc.journal.issue3
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.482796
dc.journal.fristpage259
dc.journal.lastpage263
dc.identifier.eissn1528-8889
dc.keywordsTemperature
dc.keywordsSteel
dc.keywordsCreep
dc.keywordsRupture
dc.keywordsHigh temperature
dc.keywordsMaintenance
dc.keywordsHeat
dc.keywordsRotors
dc.keywordsWelding AND Stability
dc.treeJournal of Engineering Materials and Technology:;2000:;volume( 122 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record