Show simple item record

dc.contributor.authorZ. Yang
dc.contributor.authorC. T. Sun
dc.date.accessioned2017-05-09T00:02:31Z
dc.date.available2017-05-09T00:02:31Z
dc.date.copyrightOctober, 2000
dc.date.issued2000
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-27013#428_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/123742
dc.description.abstractIn this paper, an experimental investigation on interlaminar fracture behavior and fracture toughness of a graphite/epoxy multidirectional composite laminate is presented using end-notched flexure specimens. The 0/θ interfaces are considered. The interlaminar fracture toughness is obtained and compared using three data reduction methods, i.e., the area method, classical laminated plate theory, and finite element analysis. Results show that the toughness value depends on the data reduction method used. Two different crack-length-to-span ratios are chosen to study how the stable or unstable crack extension influences the toughness measurement. It is observed that the toughness obtained from the tests of stable crack extension is appreciably higher than that from the tests of unstable crack extension. It is also seen that friction resulting from contact of crack surfaces greatly affects the measured toughness in the case of stable crack extension. In addition, effects of the specimen geometry and fiber orientation on the interlaminar fracture toughness are also evaluated. [S0094-4289(00)02804-8]
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleInterlaminar Fracture Toughness of a Graphite/Epoxy Multidirectional Composite1
dc.typeJournal Paper
dc.journal.volume122
dc.journal.issue4
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.1289027
dc.journal.fristpage428
dc.journal.lastpage433
dc.identifier.eissn1528-8889
dc.keywordsLaminates
dc.keywordsFracture (Materials)
dc.keywordsFracture toughness
dc.keywordsToughness
dc.keywordsComposite materials
dc.keywordsGraphite
dc.keywordsEpoxy adhesives
dc.keywordsFinite element analysis
dc.keywordsFracture (Process)
dc.keywordsFibers AND Stress
dc.treeJournal of Engineering Materials and Technology:;2000:;volume( 122 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record