Show simple item record

dc.contributor.authorStuart Barnes
dc.contributor.authorIan R. Pashby
dc.date.accessioned2017-05-09T00:02:30Z
dc.date.available2017-05-09T00:02:30Z
dc.date.copyrightOctober, 2000
dc.date.issued2000
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-27013#384_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/123733
dc.description.abstractThrough-tool coolant was applied to the drilling of an aluminum/SiC MMC. Titanium nitride coated, solid carbide drills were used to investigate the effect of the coolant application method on the performance of the drilling operation. Holes were produced dry, with conventional coolant and with through-the tool coolant. The results provided strong evidence that the conventional application of coolant was having no beneficial effect on the cutting operation compared to dry drilling. However, through-tool cooling gave a significant improvement in performance in terms of tool wear, cutting forces, surface finish and the height of the burrs produced. [S0094-4289(00)02104-6]
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleThrough-Tool Coolant Drilling of Aluminum/SiC Metal Matrix Composite1
dc.typeJournal Paper
dc.journal.volume122
dc.journal.issue4
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.1288925
dc.journal.fristpage384
dc.journal.lastpage388
dc.identifier.eissn1528-8889
dc.keywordsAluminum
dc.keywordsDrills (Tools)
dc.keywordsDrilling
dc.keywordsCoolants
dc.keywordsCutting
dc.keywordsWear
dc.keywordsMetals AND Cooling
dc.treeJournal of Engineering Materials and Technology:;2000:;volume( 122 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record