Show simple item record

dc.contributor.authorJesus R. Rodriguez
dc.contributor.authorFathi Finaish
dc.contributor.authorShari Dunn-Norman
dc.date.accessioned2017-05-09T00:02:16Z
dc.date.available2017-05-09T00:02:16Z
dc.date.copyrightSeptember, 2000
dc.date.issued2000
dc.identifier.issn0195-0738
dc.identifier.otherJERTD2-26491#136_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/123601
dc.description.abstractA shroud is commonly used around the motor of an electrical submersible pump (ESP) to accelerate reservoir fluids past the motor for cooling. Standard practice has been to design the shroud/motor configuration relative to the casing using a minimum fluid velocity of 0.3048 m/s (1 ft/s) rule of thumb as a production strategy. The increase in the use of ESPs to exploit heavy oil reservoirs has brought up the necessity of revising this rule in order to prevent motor burnouts. A parametric study has been conducted using the computational fluid dynamics software CFX4.2 to examine the heat transfer behavior of the shroud motor configuration as a function of motor/shroud standoff. The objective of this effort is to examine the validity of the historical rule of thumb for heavy oils. Results for a case study on an oil with a viscosity of 78 cp @ 320 K are presented. Further, to explore the possibility of enhancing the heat transfer characteristics, the flow configuration was modified by incorporating several openings on the shroud. Based on the obtained results, it can be concluded that fluid velocity should be kept around 0.85 m/s (2.8 ft/s) as opposed to 1 ft/s to assure proper cooling of the motor. Also, flow redistribution by proper placement of the slots on the shroud may produce better heat transfer between the oil and the motor wall. [S0195-0738(00)00703-2]
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleParametric Study of Motor/Shroud Heat Transfer Performance in an Electrical Submersible Pump (ESP)
dc.typeJournal Paper
dc.journal.volume122
dc.journal.issue3
dc.journal.titleJournal of Energy Resources Technology
dc.identifier.doi10.1115/1.1289638
dc.journal.fristpage136
dc.journal.lastpage141
dc.identifier.eissn1528-8994
dc.keywordsHeat transfer
dc.keywordsFluids
dc.keywordsEngines
dc.keywordsPumps
dc.keywordsSubmersibles
dc.keywordsTemperature
dc.keywordsFlow (Dynamics)
dc.keywordsReservoirs
dc.keywordsViscosity AND Cooling
dc.treeJournal of Energy Resources Technology:;2000:;volume( 122 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record