Show simple item record

dc.contributor.authorR. Rajamani
dc.contributor.authorS. B. Choi
dc.contributor.authorB. K. Law
dc.contributor.authorJ. K. Hedrick
dc.contributor.authorR. Prohaska
dc.contributor.authorP. Kretz
dc.date.accessioned2017-05-09T00:02:01Z
dc.date.available2017-05-09T00:02:01Z
dc.date.copyrightSeptember, 2000
dc.date.issued2000
dc.identifier.issn0022-0434
dc.identifier.otherJDSMAA-26270#470_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/123453
dc.description.abstractThis paper presents the design and experimental implementation of a longitudinal control system for the operation of automated vehicles in platoons. The control system on each vehicle is designed to have a hierarchical structure and consists of an upper level controller and a lower level controller. The upper controller determines the desired acceleration for each vehicle in the platoon so as to maintain safe string-stable operation even at very small intervehicle spacing. The lower controller utilizes vehicle-specific parameters and determines the throttle and/or brake commands required to track the desired acceleration. A special challenge handled in the design of the lower level controller is low-speed operation that involves gear changes and torque converter dynamics. The paper also presents the design of longitudinal intra-platoon maneuvers that are required in order to allow any car in the platoon to make an exit. The paper presents extensive experimental results from the public NAHSC demonstration of automated highways conducted in August 1997 at San Diego, California. The demonstration included an eight-car platoon operating continuously over several weeks with passenger rides given to over a thousand visitors. The maneuvers demonstrated included starting the automated vehicles from complete rest, accelerating to cruising speed, allowing any vehicle to exit from the platoon, allowing new vehicles to join the platoon and bringing the platoon to a complete stop at the end of the highway. [S0022-0434(00)01903-1]
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleDesign and Experimental Implementation of Longitudinal Control for a Platoon of Automated Vehicles
dc.typeJournal Paper
dc.journal.volume122
dc.journal.issue3
dc.journal.titleJournal of Dynamic Systems, Measurement, and Control
dc.identifier.doi10.1115/1.1286682
dc.journal.fristpage470
dc.journal.lastpage476
dc.identifier.eissn1528-9028
dc.keywordsControl equipment
dc.keywordsDesign
dc.keywordsGears
dc.keywordsVehicles
dc.keywordsAutomobiles
dc.keywordsHighways
dc.keywordsControl systems
dc.keywordsBrakes
dc.keywordsTorque converters AND Torque
dc.treeJournal of Dynamic Systems, Measurement, and Control:;2000:;volume( 122 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record