Show simple item record

dc.contributor.authorD. Julien
dc.contributor.authorN. R. Saad
dc.contributor.authorH. Luan Nguyen
dc.contributor.authorT. Bui-Quoc
dc.contributor.authorM. Bernard
dc.date.accessioned2017-05-09T00:00:45Z
dc.date.available2017-05-09T00:00:45Z
dc.date.copyrightFebruary, 1999
dc.date.issued1999
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28389#109_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/122766
dc.description.abstractIn this paper, the effect of a combined bending/tension loading on the fatigue resistance and on the fatigue crack growth characteristics of a nickel-based alloy at room temperature is studied. For this purpose, a device was specifically designed so that it can be mounted onto a servohydraulic push-pull testing machine. With the device, a simultaneous displacement and rotation of the specimen extremities generate a combined bending/axial stress; the ratio between the bending stress and the axial stress may be specified by adjusting the eccentricity between the specimen axis and the load axis. Stress-controlled fatigue tests were carried out on plate specimens under bending/tension loading with a surface stress ratio of −0.52 (ratio between the maximum cyclic stress on the back face and that on the front face of the specimen). During each test, the fatigue crack length was monitored using two traveling video-cameras. The experimental results obtained under bending/tension loading have been analyzed in connection with the data obtained under pure tension loading. In particular, the fatigue crack propagation rate expressed in terms of the stress intensity factor of a crack under combined loading was examined.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleLow-Cycle Fatigue Behavior of a Nickel-Based Alloy Under Combined Bending/Tension Loading
dc.typeJournal Paper
dc.journal.volume121
dc.journal.issue1
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.2883657
dc.journal.fristpage109
dc.journal.lastpage115
dc.identifier.eissn1528-8978
dc.keywordsNickel
dc.keywordsAlloys
dc.keywordsLow cycle fatigue
dc.keywordsTension
dc.keywordsStress
dc.keywordsFatigue cracks
dc.keywordsFatigue testing
dc.keywordsElectrical resistance
dc.keywordsTravel
dc.keywordsVideo cameras
dc.keywordsFracture (Materials)
dc.keywordsBending (Stress)
dc.keywordsTesting
dc.keywordsDisplacement
dc.keywordsMachinery
dc.keywordsRotation
dc.keywordsFatigue AND Temperature
dc.treeJournal of Pressure Vessel Technology:;1999:;volume( 121 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record