Show simple item record

dc.contributor.authorJ. Taler
dc.contributor.authorB. Węglowski
dc.contributor.authorW. Zima
dc.contributor.authorS. Grądziel
dc.contributor.authorM. Zborowski
dc.date.accessioned2017-05-09T00:00:44Z
dc.date.available2017-05-09T00:00:44Z
dc.date.copyrightFebruary, 1999
dc.date.issued1999
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28389#84_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/122763
dc.description.abstractThe paper presents an analytical way of calculating thermal stress distributions in cylindrical vessels, nonuniformly heated on their circumference. In thick-walled vessel elements, simplified analytical formulas do not give satisfactory results. A new method for determining thermal stresses has been developed. On the basis of temperature history measurements at several points on the drum outer surface, a time-space temperature distribution in the component cross section is determined, and next, thermal stresses are calculated using the finite element method (FEM). The new method, proposed for the solution of the inverse heat conduction problem, is sufficiently accurate. Knowledge of the boundary conditions on the inner surface of the drum, i.e., fluid temperature and heat transfer coefficient, is not necessary because the transient temperature distribution in the component is obtained from the solution of the inverse heat conduction problem. Comparison of the thermal distributions from FEM versus the new method demonstrate the accuracy of the new method. An example application of the new method demonstrates its benefits over the solution of the boundary-initial problem obtained by FEM.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleAnalysis of Thermal Stresses in a Boiler Drum During Start-Up
dc.typeJournal Paper
dc.journal.volume121
dc.journal.issue1
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.2883672
dc.journal.fristpage84
dc.journal.lastpage93
dc.identifier.eissn1528-8978
dc.keywordsThermal stresses
dc.keywordsBoilers
dc.keywordsFinite element model
dc.keywordsTemperature distribution
dc.keywordsVessels
dc.keywordsTemperature
dc.keywordsHeat conduction
dc.keywordsFluids
dc.keywordsMeasurement
dc.keywordsBoundary-value problems
dc.keywordsHeat transfer coefficients AND Formulas
dc.treeJournal of Pressure Vessel Technology:;1999:;volume( 121 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record