Show simple item record

dc.contributor.authorK. Nakacho
dc.contributor.authorY. Ueda
dc.date.accessioned2017-05-09T00:00:43Z
dc.date.available2017-05-09T00:00:43Z
dc.date.copyrightFebruary, 1999
dc.date.issued1999
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28389#11_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/122753
dc.description.abstractStress-relief annealing (SR treatment) is often applied to relieve welding residual stresses in the fabrication process of pressure vessels, etc. This study aims at development of an efficient method as simple as hand calculation to estimate reduction of residual stresses of very thick welded joint by SR treatment. In the first report, an estimating method was developed for relaxation tests, in uniaxial stress state, at changing and constant temperatures because the stress relaxation phenomenon is considerably similar to that observed in the SR treatment of a joint. In this report, the stresses relaxed by SR treatment in a very thick welded joint are analyzed accurately by the finite element method based on thermal elastic-plastic-creep theory. The characteristics of the changes of the welding residual stresses in multiaxial stress state are studied in detail for further development of the estimating method to SR treatment of a very thick welded joint, of which the stress state and boundary condition are very complex.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleA Simple Estimating Method for Reduction of Welding Residual Stresses in Thick Welded Joint From Stress-Relief Annealing—Part II: The Characteristics of Reduction of Welding Residual Stresses in Very Thick Joints During SR Treatment
dc.typeJournal Paper
dc.journal.volume121
dc.journal.issue1
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.2883659
dc.journal.fristpage11
dc.journal.lastpage16
dc.identifier.eissn1528-8978
dc.keywordsWelding
dc.keywordsAnnealing
dc.keywordsResidual stresses
dc.keywordsStress
dc.keywordsWelded joints
dc.keywordsRelaxation (Physics)
dc.keywordsCreep
dc.keywordsTemperature
dc.keywordsManufacturing
dc.keywordsPressure vessels
dc.keywordsBoundary-value problems AND Finite element methods
dc.treeJournal of Pressure Vessel Technology:;1999:;volume( 121 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record