Show simple item record

dc.contributor.authorJ. A. Keeney
dc.date.accessioned2017-05-09T00:00:43Z
dc.date.available2017-05-09T00:00:43Z
dc.date.copyrightFebruary, 1999
dc.date.issued1999
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28389#1_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/122751
dc.description.abstractThis paper presents updated analyses of the cylinder specimen being used in the international Network for Evaluating Steel Components (NESC) large-scale spinning-cylinder project (NESC-1). The NESC was organized as an international forum to exchange information on procedures for structural integrity assessment, to collaborate on specific projects, and to promote the harmonization of international standards. The objective of the NESC-1 project is to focus on a complete procedure for assessing the structural integrity of aged reactor pressure vessels. A clad cylinder containing through-clad and subclad cracks will be tested under pressurized-thermal shock conditions at AEA Technology, Risley, U.K. Three-dimensional finite-element analyses were carried out to determine the effects of including the cladding heat-affected zone (HAZ) in the models. The cylinder was modeled with inner-surface through-clad cracks having a depth of 74 mm and aspect ratios of 2:1 and 6:1. The cylinder specimen was subjected to centrifugal loading followed by a thermal shock and analyzed with a thermoelastic-plastic material model. The peak KI values occurred at the clad/HAZ interface for the 6:1 crack and at the HAZ/base interface for the 2:1 crack. The analytical results indicate that cleavage initiation is likely to be achieved for the 6:1 crack, but questionable for the 2:1 crack.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleFracture Analysis of the Heat-Affected Zone in the NESC-1 Spinning Cylinder Experiment
dc.typeJournal Paper
dc.journal.volume121
dc.journal.issue1
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.2883662
dc.journal.fristpage1
dc.journal.lastpage5
dc.identifier.eissn1528-8978
dc.keywordsHeat
dc.keywordsSpin (Aerodynamics)
dc.keywordsFracture (Process)
dc.keywordsCylinders
dc.keywordsFracture (Materials)
dc.keywordsCladding systems (Building)
dc.keywordsFinite element analysis
dc.keywordsNetworks
dc.keywordsThermal shock
dc.keywordsReactor vessels
dc.keywordsShock (Mechanics)
dc.keywordsSteel AND Engineering standards
dc.treeJournal of Pressure Vessel Technology:;1999:;volume( 121 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record