Show simple item record

dc.contributor.authorM. Higuchi
dc.contributor.authorT. Yamauchi
dc.contributor.authorY. Tanaka
dc.contributor.authorK. Iida
dc.date.accessioned2017-05-09T00:00:42Z
dc.date.available2017-05-09T00:00:42Z
dc.date.copyrightMay, 1999
dc.date.issued1999
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28391#196_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/122743
dc.description.abstractThe procedure for making crack starter weld deposit on drop-weight test (DWT) specimens was altered from two passes to one pass in about 1990. The effects of some parameters of crack starter weld process on drop-weight test results were studied. Results of this study indicated that length of overlap of the second pass and height of crack starter beads were most effective on nil-ductility temperature (T NDT ). When overlap length and bead height of two-pass deposit were small enough, T NDT obtained by two-pass deposit became lower than one-pass T NDT , the discrepancy being by as much as 25°C. T NDT values for 24 Japanese steels were determined using two different DWT methods, one-pass deposit and two-pass deposit having small overlap length and bead height. The difference of T NDT depending on DWT method could be seen only for high-toughness low-alloy steel base metals. For other materials (i.e., low-to-medium-toughness low-alloy steel base metals, weld metals, and high-toughness carbon steels), T NDT S by two-pass and one-pass deposits were essentially the same. For lower-toughness steels, T NDT was frequently lower than the temperature of v T cv − 33°C), and thus, the reference nil-ductility temperature RT NDT was determined from Charpy impact test results. These results can be taken as a way of interpreting the past toughness evaluations made for operating plants using the two-pass T NDT .
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleEffects of Crack Starter Bead Preparation in Drop-Weight Test on Nil-Ductility Transition Temperature
dc.typeJournal Paper
dc.journal.volume121
dc.journal.issue2
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.2883686
dc.journal.fristpage196
dc.journal.lastpage202
dc.identifier.eissn1528-8978
dc.keywordsWeight (Mass)
dc.keywordsDrops
dc.keywordsPhase transition temperature
dc.keywordsDuctility
dc.keywordsFracture (Materials)
dc.keywordsSteel
dc.keywordsToughness
dc.keywordsDiscrete wavelet transforms
dc.keywordsTemperature
dc.keywordsBase metals
dc.keywordsAlloys
dc.keywordsImpact testing
dc.keywordsIndustrial plants
dc.keywordsMetals AND Carbon
dc.treeJournal of Pressure Vessel Technology:;1999:;volume( 121 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record