Show simple item record

dc.contributor.authorW. M. Beltman
dc.contributor.authorE. N. Burcsu
dc.contributor.authorJ. E. Shepherd
dc.contributor.authorL. Zuhal
dc.date.accessioned2017-05-09T00:00:40Z
dc.date.available2017-05-09T00:00:40Z
dc.date.copyrightAugust, 1999
dc.date.issued1999
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28392#315_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/122727
dc.description.abstractThe internal shock loading of cylindrical shells can be represented as a step load advancing at constant speed. Several analytical models are available to calculate the structural response of shells to this type of loading. These models show that the speed of the shock wave is an important parameter. In fact, for a linear model of a shell of infinite length, the amplitude of the radial deflection becomes unbounded when the speed of the shock wave is equal to a critical velocity. It is evident that simple (static) design formulas are no longer accurate in this case. The present paper deals with a numerical and experimental study on the structural response of a thin aluminum cylindrical shell to shock loading. Transient finite element calculations were carried out for a range of shock speeds. The results were compared to experimental results obtained with the GALCIT 6-in. shock tube facility. Both the experimental and the numerical results show an increase in amplitude near the critical velocity, as predicted by simple steady-state models for shells of infinite length. However, the finite length of the shell results in some transient phenomena. These phenomena are related to the reflection of structural waves and the development of the deflection profile when the shock wave enters the shell.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleThe Structural Response of Cylindrical Shells to Internal Shock Loading
dc.typeJournal Paper
dc.journal.volume121
dc.journal.issue3
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.2883709
dc.journal.fristpage315
dc.journal.lastpage322
dc.identifier.eissn1528-8978
dc.keywordsShock (Mechanics)
dc.keywordsPipes
dc.keywordsShells
dc.keywordsShock waves
dc.keywordsDeflection
dc.keywordsFormulas
dc.keywordsDesign
dc.keywordsFinite element analysis
dc.keywordsReflection
dc.keywordsStress
dc.keywordsWaves
dc.keywordsTransients (Dynamics)
dc.keywordsShock tubes
dc.keywordsSteady state AND Aluminum
dc.treeJournal of Pressure Vessel Technology:;1999:;volume( 121 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record