Show simple item record

dc.contributor.authorB. R. Bass
dc.contributor.authorW. J. McAfee
dc.contributor.authorJ. W. Bryson
dc.contributor.authorW. E. Pennell
dc.date.accessioned2017-05-09T00:00:39Z
dc.date.available2017-05-09T00:00:39Z
dc.date.copyrightAugust, 1999
dc.date.issued1999
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28392#257_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/122717
dc.description.abstractPotential structural-integrity benefits or liabilities of the stainless steel cladding on the inner surface of a reactor pressure vessel (RPV) are important considerations in the effort to refine or improve safety assessment procedures applied to RPVs. Clad-beam tests were carried out to investigate and quantify effects of the clad structure on fracture initiation toughness of through-clad shallow surface flaws in RPV material. A cruciform beam specimen was developed at ORNL to introduce a prototypic, far-field, out-of-plane biaxial stress component that provides a linear approximation of the nonlinear stress distribution generated by thermo-mechanical loading transients in an RPV. The cruciform specimens (102-mm-thick test section) were fabricated from RPV shell segments available from a canceled pressurized-water reactor plant. The specimens were tested under biaxial load ratios ranging from 0.0 (uniaxial) to 1.0 (full biaxial), the ratio being defined as the total load applied to the transverse beam arms divided by that applied to the longitudinal arms. The test results imply that biaxial loading is effective in reducing the shallow-flaw fracture toughness of the clad/heat-affected zone/structural-weld region of the RPV shell below that determined from uniaxial loading conditions. The lowest toughness value from the clad cruciform specimens tested under biaxial loading is only slightly above the ASME Section XI KIc curve. For all biaxiality ratios, the test results imply that shallow-flaw fracture toughness data from the RPV structural weld material are significantly lower than that obtained from a high-yield strength plate material.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleAn Investigation of Cladding Effects on Shallow-Flaw Fracture Toughness of Reactor Pressure Vessel Steel Under Prototypic Biaxial Loading
dc.typeJournal Paper
dc.journal.volume121
dc.journal.issue3
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.2883701
dc.journal.fristpage257
dc.journal.lastpage268
dc.identifier.eissn1528-8978
dc.keywordsSteel
dc.keywordsCladding systems (Building)
dc.keywordsFracture toughness
dc.keywordsReactor vessels
dc.keywordsStress
dc.keywordsShells
dc.keywordsToughness
dc.keywordsWater
dc.keywordsStainless steel
dc.keywordsHeat
dc.keywordsStress concentration
dc.keywordsSafety
dc.keywordsIndustrial plants
dc.keywordsFracture (Process) AND Approximation
dc.treeJournal of Pressure Vessel Technology:;1999:;volume( 121 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record