Show simple item record

dc.contributor.authorD. P. Jones
dc.contributor.authorJ. R. Shadley
dc.contributor.authorE. F. Rybicki
dc.contributor.authorW. R. Mabe
dc.date.accessioned2017-05-09T00:00:38Z
dc.date.available2017-05-09T00:00:38Z
dc.date.copyrightNovember, 1999
dc.date.issued1999
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28395#423_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/122709
dc.description.abstractResults of through-thickness residual stress measurements are provided for a variety of samples of weld-deposited 308/309L stainless steel and Alloy 600 cladding on low-alloy pressure vessel ferritic steels. Clad thicknesses between 5 and 9 mm on samples that vary in thickness from 45 to 200 mm were studied. The samples were taken from flat plates, from a spherical head of a pressure vessel, from a ring-segment of a nozzle bore, and from the transition radius between a nozzle and a pressure vessel shell. A layer removal method was used to measure the residual stresses. The effects of uncertainties in elastic constants (Young’s modulus and Poisson’s ratio) as well as experimental error are assessed. All measurements were done at room temperature. The results of this work indicate that curvature plays a significant role in cladding residual stress and that tensile residual stresses as high as the yield stress can be measured in the cladding material. Since the vessel from which the spherical and nozzle corner samples were taken was hydrotested, and the flat plate specimens were taken from specimens used in mechanical fatigue testing, these results suggest that rather high tensile residual stresses can be retained in the cladding material, even after some mechanical loading associated with hydrotesting.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleResidual Stresses in Weld-Deposited Clad Pressure Vessels and Nozzles
dc.typeJournal Paper
dc.journal.volume121
dc.journal.issue4
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.2883725
dc.journal.fristpage423
dc.journal.lastpage429
dc.identifier.eissn1528-8978
dc.keywordsPressure vessels
dc.keywordsResidual stresses
dc.keywordsNozzles
dc.keywordsCladding systems (Building)
dc.keywordsMeasurement
dc.keywordsFlat plates
dc.keywordsStress
dc.keywordsAlloys
dc.keywordsThickness
dc.keywordsVessels
dc.keywordsYield stress
dc.keywordsSteel
dc.keywordsElasticity
dc.keywordsTemperature
dc.keywordsPoisson ratio
dc.keywordsCorners (Structural elements)
dc.keywordsShells
dc.keywordsStainless steel
dc.keywordsElastic constants
dc.keywordsErrors AND Fatigue testing
dc.treeJournal of Pressure Vessel Technology:;1999:;volume( 121 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record