| dc.contributor.author | F. L. Chen | |
| dc.contributor.author | T. X. Yu | |
| dc.date.accessioned | 2017-05-09T00:00:38Z | |
| dc.date.available | 2017-05-09T00:00:38Z | |
| dc.date.copyright | November, 1999 | |
| dc.date.issued | 1999 | |
| dc.identifier.issn | 0094-9930 | |
| dc.identifier.other | JPVTAS-28395#406_1.pdf | |
| dc.identifier.uri | http://yetl.yabesh.ir/yetl/handle/yetl/122707 | |
| dc.description.abstract | This paper examines a projectile impact on a rigid-plastic beam with cracks at the fully clamped ends. By assuming the cracked sections yield immediately after impact, a three-hinge/two-hinge mechanism for the response process is constructed so that a complete solution considering the interaction between bending moment M and axial force N is derived. The key of the formulation is to find a complementary equation concerning the axial force N . To predict accurately the stability of the initial cracks, the J -integral criterion is extended to involve the contribution of the axial force. All the governing equations are nondimensionalized and rearranged, ready for Runge-Kutta integration procedure. The numerical results demonstrate that the mass ratio and the axial force have significant influence on the final deformation, energy partition, and the value of J -integral near the crack tip. The J -integral is not very sensitive to the depth of the initial cracks, but the presence of initial cracks in a beam may alter the failure behavior of the beam after impact, that is, from a strength-type failure to a fracture-type failure. | |
| dc.publisher | The American Society of Mechanical Engineers (ASME) | |
| dc.title | Dynamic Behavior of a Clamped Plastic Beam With Cracks at Supporting Ends Under Impact | |
| dc.type | Journal Paper | |
| dc.journal.volume | 121 | |
| dc.journal.issue | 4 | |
| dc.journal.title | Journal of Pressure Vessel Technology | |
| dc.identifier.doi | 10.1115/1.2883723 | |
| dc.journal.fristpage | 406 | |
| dc.journal.lastpage | 412 | |
| dc.identifier.eissn | 1528-8978 | |
| dc.keywords | Force | |
| dc.keywords | Stability | |
| dc.keywords | Deformation | |
| dc.keywords | Hinges | |
| dc.keywords | Interior walls | |
| dc.keywords | Fracture (Materials) | |
| dc.keywords | Fracture (Process) | |
| dc.keywords | Equations | |
| dc.keywords | Failure | |
| dc.keywords | Projectiles AND Mechanisms | |
| dc.tree | Journal of Pressure Vessel Technology:;1999:;volume( 121 ):;issue: 004 | |
| dc.contenttype | Fulltext | |