Show simple item record

dc.contributor.authorM. A. Shalaby
dc.contributor.authorM. Y. A. Younan
dc.date.accessioned2017-05-09T00:00:38Z
dc.date.available2017-05-09T00:00:38Z
dc.date.copyrightNovember, 1999
dc.date.issued1999
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28395#400_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/122706
dc.description.abstractThe purpose of this study is to investigate the effect of pressure on the strain and stress analysis of pipe elbows subjected to in-plane bending moments. A finite element model for the bend was constructed and loaded with a pressure of 1200 psi and end moments taking geometric and material nonlinearities into account using (ABAQUS) nonlinear finite element code. The pressure changes the effective stress distribution and location of the initial yielding from the inside surface of the elbow crown to the outside surface for the closing moment case and increases the moment of yielding. For the opening moment case, yielding starts at the inside surface of the elbow crown with and without pressure. The pressure changes the location of the maximum axial strain at instability for the closing and opening cases, and it also changes the ovality of the cross section in both cases.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleEffect of Internal Pressure on Elastic-Plastic Behavior of Pipe Elbows Under In-Plane Bending Moments
dc.typeJournal Paper
dc.journal.volume121
dc.journal.issue4
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.2883722
dc.journal.fristpage400
dc.journal.lastpage405
dc.identifier.eissn1528-8978
dc.keywordsPressure
dc.keywordsPipes
dc.keywordsFinite element model
dc.keywordsStress
dc.keywordsStress concentration AND Finite element analysis
dc.treeJournal of Pressure Vessel Technology:;1999:;volume( 121 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record