Show simple item record

dc.contributor.authorE. A. Badr
dc.contributor.authorJ. R. Sorem
dc.contributor.authorS. M. Tipton
dc.date.accessioned2017-05-09T00:00:37Z
dc.date.available2017-05-09T00:00:37Z
dc.date.copyrightNovember, 1999
dc.date.issued1999
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28395#358_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/122698
dc.description.abstractCrossbore intersections in liquid ends of positive displacement pumps (PDPs) have regions with high stress concentration. Due to the cyclic loading that occurs in most PDPs, these stress concentration points are susceptible to fatigue cracking. In order to prolong their life, the liquid ends are often overpressurized (autofrettaged), thus inducing beneficial compressive hoop stresses in these critical regions upon removal of the autofrettage pressure. This autofrettage process drives the region of high stress concentration beyond the elastic limit and well into the elastic-plastic region. Elastic-plastic stresses and strains due to loading and unloading were analyzed in crossbore geometries, with Bauschinger effect included, using 3-D finite element analysis of the liquid end. For comparison, an analytical approach was developed, based on the strain energy density criterion first proposed by Glinka. The approach was modified to include the Bauschinger effect for precise estimation of such stresses and strains. Good correlation was observed between elastic-plastic crossbore stresses and strains predicted by the analytical approach and the finite element analysis.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleResidual Stress Estimation in Crossbores With Bauschinger Effect Inclusion Using FEM and Strain Energy Density
dc.typeJournal Paper
dc.journal.volume121
dc.journal.issue4
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.2883715
dc.journal.fristpage358
dc.journal.lastpage363
dc.identifier.eissn1528-8978
dc.keywordsStress
dc.keywordsFinite element methods
dc.keywordsDensity
dc.keywordsFinite element model
dc.keywordsStress concentration
dc.keywordsFinite element analysis
dc.keywordsAutofrettage
dc.keywordsVacuum pumps
dc.keywordsFatigue cracks
dc.keywordsPressure AND Intersections
dc.treeJournal of Pressure Vessel Technology:;1999:;volume( 121 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record