Show simple item record

dc.contributor.authorJack E. Helms
dc.contributor.authorChihdar Yang
dc.contributor.authorSu-Seng Pang
dc.date.accessioned2017-05-08T23:59:47Z
dc.date.available2017-05-08T23:59:47Z
dc.date.copyrightJuly, 1999
dc.date.issued1999
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26999#374_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/122232
dc.description.abstractA model of a taper-taper adhesive-bonded joint under cylindrical bending has been derived using first-order laminated plate theory. Shear correction factors were used to account for transverse shear deformation. A FORTRAN program was written to integrate the resulting system of twelve simultaneous, linear, first-order, differential equations with variable coefficients. The Linear Shooting Method was used to solve the model. A finite element model was developed using the COSMOS/M commercial finite element package to verify the analytical model for a cross-ply laminate. The analytical model results agreed well with the finite element models and predicted peak adhesive stresses within about 2% of the finite element model.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleStress-Strain Analysis of a Taper-Taper Adhesive-Bonded Joint Under Cylindrical Bending
dc.typeJournal Paper
dc.journal.volume121
dc.journal.issue3
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.2812389
dc.journal.fristpage374
dc.journal.lastpage380
dc.identifier.eissn1528-8889
dc.keywordsStress
dc.keywordsAdhesives
dc.keywordsFinite element model
dc.keywordsFORTRAN
dc.keywordsShear deformation
dc.keywordsLaminates
dc.keywordsShear (Mechanics)
dc.keywordsDifferential equations
dc.keywordsFinite element analysis AND Universe
dc.treeJournal of Engineering Materials and Technology:;1999:;volume( 121 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record