Show simple item record

dc.contributor.authorY. Shindo
dc.contributor.authorR. Wang
dc.contributor.authorK. Horiguchi
dc.contributor.authorS. Ueda
dc.date.accessioned2017-05-08T23:59:47Z
dc.date.available2017-05-08T23:59:47Z
dc.date.copyrightJuly, 1999
dc.date.issued1999
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26999#367_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/122231
dc.description.abstractThe cryogenic interlaminar shear behavior of G-10CR glass-cloth/epoxy laminates has been discussed through theoretical and experimental characterizations. The use of the double-notch shear test for measuring the interlaminar shear strength of glass-cloth/epoxy laminates at low temperatures is evaluated first. The interlaminar shear tests were carried out with double-notch shear specimens at room temperature, 77 K and 4 K to evaluate the interlaminar shear strength (ILSS) of G-10CR glass-cloth/epoxy laminates. The double-notch shear specimen was loaded on its ends in compression with a supporting jig to prevent buckling. These tests were conducted in accordance with ASTM D3846-79. The effects of temperature, specimen thickness, and notch separation on the apparent ILSS are shown graphically. Fracture surfaces were examined by scanning electron microscopy (SEM) and optical microscopy to verify the failure mechanisms. A three-dimensional finite element analysis was also performed to investigate the effect of specimen thickness and notch separation on the shear stress distribution in the expected fracture plane. Effective elastic moduli were determined under the assumption of uniform strain inside the representative volume element. The numerical findings are then correlated with the representative volume element. The numerical findings are then correlated with the experimental results. The validity of this test technique has been established.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleTheoretical and Experimental Evaluation of Double-Notch Shear Strength of G-10CR Glass-Cloth/Epoxy Laminates at Cryogenic Temperatures
dc.typeJournal Paper
dc.journal.volume121
dc.journal.issue3
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.2812388
dc.journal.fristpage367
dc.journal.lastpage373
dc.identifier.eissn1528-8889
dc.keywordsGlass
dc.keywordsTextiles
dc.keywordsLaminates
dc.keywordsEpoxy adhesives
dc.keywordsTemperature
dc.keywordsShear strength
dc.keywordsShear (Mechanics)
dc.keywordsThickness
dc.keywordsSeparation (Technology)
dc.keywordsFracture (Process)
dc.keywordsLow temperature
dc.keywordsScanning electron microscopy
dc.keywordsBuckling
dc.keywordsCompression
dc.keywordsElastic moduli
dc.keywordsOptical microscopy
dc.keywordsASTM International
dc.keywordsStress concentration
dc.keywordsTemperature effects
dc.keywordsFailure mechanisms
dc.keywordsFinite element analysis AND Jigs and fixtures
dc.treeJournal of Engineering Materials and Technology:;1999:;volume( 121 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record