Show simple item record

dc.contributor.authorEdoardo Capello
dc.contributor.authorPiermaria Davoli
dc.contributor.authorGianluca Bassanini
dc.contributor.authorAlessandro Bisi
dc.date.accessioned2017-05-08T23:59:47Z
dc.date.available2017-05-08T23:59:47Z
dc.date.copyrightJuly, 1999
dc.date.issued1999
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26999#346_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/122228
dc.description.abstractThe fatigue resistance of components is greatly influenced by their surface integrity. In particular, residual stresses and surface roughness are held to be the primary factors influencing fatigue resistance. This paper presents an experimental study of the influence of turning parameters on surface roughness and residual stresses. Two steels were machined by turning, the results of variations in four process parameters were measured and analyzed. These results show that in the typical range of industrial machining conditions both surface finish and residual stresses are influenced mainly by the feed rate and the nose radius; the cutting velocity and the primary rake angle play a minor, negligible role. Moreover, two empirical models were identified that can be used to predict residual stresses and roughness as a function of the two major turning parameters. These models can be used to optimize the turning conditions of components when their functionality requires the control of residual stresses and surface roughness.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleResidual Stresses and Surface Roughness in Turning
dc.typeJournal Paper
dc.journal.volume121
dc.journal.issue3
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.2812385
dc.journal.fristpage346
dc.journal.lastpage351
dc.identifier.eissn1528-8889
dc.keywordsResidual stresses
dc.keywordsSurface roughness
dc.keywordsTurning
dc.keywordsElectrical resistance
dc.keywordsFatigue
dc.keywordsMachining
dc.keywordsSteel
dc.keywordsFinishes AND Cutting
dc.treeJournal of Engineering Materials and Technology:;1999:;volume( 121 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record