Show simple item record

dc.contributor.authorS. R. Daniewicz
dc.contributor.authorS. D. Cummings
dc.date.accessioned2017-05-08T23:59:46Z
dc.date.available2017-05-08T23:59:46Z
dc.date.copyrightJuly, 1999
dc.date.issued1999
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26999#336_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/122226
dc.description.abstractA traversing water jet was used to impact the surface of 1100 series aluminum specimens in an effort to generate compressive residual stresses on the surface. Stresses induced by the water peening operation were measured using X-ray diffraction, and compressive stress increases as large as 60 percent of the monotonic yield strength resulted. Surface roughness and hardness were also measured. Finite element modeling of a stationary water jet impinging on an elastic-plastic half-space was performed to characterize the water peening process. Surface residual stresses were found to be a result of sub-surface plastic deformations.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleCharacterization of a Water Peening Process
dc.typeJournal Paper
dc.journal.volume121
dc.journal.issue3
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.2812383
dc.journal.fristpage336
dc.journal.lastpage340
dc.identifier.eissn1528-8889
dc.keywordsShot peening
dc.keywordsWater
dc.keywordsResidual stresses
dc.keywordsYield strength
dc.keywordsDeformation
dc.keywordsAluminum
dc.keywordsX-ray diffraction
dc.keywordsSurface roughness
dc.keywordsStress
dc.keywordsFinite element analysis
dc.keywordsModeling
dc.keywordsCompressive stress AND Elastic half space
dc.treeJournal of Engineering Materials and Technology:;1999:;volume( 121 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record