Show simple item record

dc.contributor.authorJohn J. Ruschau
dc.contributor.authorReji John
dc.contributor.authorSteven R. Thompson
dc.contributor.authorTheodore Nicholas
dc.date.accessioned2017-05-08T23:59:46Z
dc.date.available2017-05-08T23:59:46Z
dc.date.copyrightJuly, 1999
dc.date.issued1999
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26999#321_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/122224
dc.description.abstractThe fatigue crack growth rate (FCGR) characteristics of Laser Shock Peened (LSP) titanium 6Al-4V were examined and compared to those of unprocessed material. The FCGR resistance of LSP processed material tested at low stress ratios (R) is shown to be significantly greater than for unprocessed, baseline material. The increased damage tolerance can be attributed to the large residual compressive stresses generated by the LSP process. Differences in the growth rate behavior due to LSP can be accounted for by using the closure corrected effective stress intensity range, ΔKeff , which takes into account only the portion of loading above the crack opening load. The rationale of using ΔKeff is also demonstrated through fractographic investigations.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleFatigue Crack Growth Rate Characteristics of Laser Shock Peened Ti-6Al-4V
dc.typeJournal Paper
dc.journal.volume121
dc.journal.issue3
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.2812381
dc.journal.fristpage321
dc.journal.lastpage329
dc.identifier.eissn1528-8889
dc.keywordsLasers
dc.keywordsShock (Mechanics)
dc.keywordsFatigue cracks
dc.keywordsLaser hardening
dc.keywordsStress
dc.keywordsTitanium
dc.keywordsFracture (Materials)
dc.keywordsCompressive stress AND Electrical resistance
dc.treeJournal of Engineering Materials and Technology:;1999:;volume( 121 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record