Show simple item record

dc.contributor.authorJaeung Chung
dc.contributor.authorAnthony M. Waas
dc.date.accessioned2017-05-08T23:59:45Z
dc.date.available2017-05-08T23:59:45Z
dc.date.copyrightOctober, 1999
dc.date.issued1999
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-27002#494_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/122209
dc.description.abstractThe crushing response of polycarbonate circular cell honeycomb to inplane uniaxial loading under displacement control is analyzed through a combination of experiment and numerical simulation. The experiments, which correspond to two different uniaxial loading conditions, are performed using honeycomb material which has a nearly periodic microstructure. In the initial part of the response, the specimens deform in a uniform fashion. Next, a nonlinear phase characterized by progressive localization of deformation is observed. The progressive localization causes the walls of each cell to contact. These experimental results are simulated through numerical analysis using the finite element method. The reasons for the orthotropic response of the honeycombs are discussed.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleCompressive Response and Failure of Circular Cell Polycarbonate Honeycombs Under Inplane Uniaxial Stresses
dc.typeJournal Paper
dc.journal.volume121
dc.journal.issue4
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.2812407
dc.journal.fristpage494
dc.journal.lastpage502
dc.identifier.eissn1528-8889
dc.keywordsDeformation
dc.keywordsComputer simulation
dc.keywordsStress
dc.keywordsFinite element methods
dc.keywordsNumerical analysis
dc.keywordsDisplacement control AND Failure
dc.treeJournal of Engineering Materials and Technology:;1999:;volume( 121 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record