Show simple item record

dc.contributor.authorM. Li
dc.contributor.authorR. Wang
dc.contributor.authorW. O. Soboyejo
dc.contributor.authorN. Katsube
dc.date.accessioned2017-05-08T23:59:45Z
dc.date.available2017-05-08T23:59:45Z
dc.date.copyrightOctober, 1999
dc.date.issued1999
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-27002#453_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/122203
dc.description.abstractThe effects of vanadium layer thickness (100, 200 and 400 μm) on the resistance-curve behavior of NiAl/V, microlaminates are examined in this paper. The fracture resistance of the NiAl microlaminates reinforced with 20 vol.% of vanadium layers is shown to increase with increasing vanadium layer thickness. The improved fracture toughness (from an NiAl matrix toughness of ̃6.6 MPam to a steady-state toughness of ̃15 MPam obtained from finite element analysis) is associated with crack bridging and the interactions of cracks with vanadium layers. The reinitiation of cracks in adjacent NiAl layers is modeled using finite element methods and the reinitiation is shown to occur as a result of strain concentrations at the interface between the adjacent NiAl layers and vanadium layers. The deviation of the reinitiated cracks from the pure mode I direction is shown to occur in the direction of maximum shear strain. Toughening due to crack bridging is also modeled using large-scale bridging models. The intrinsic toughness levels of the microlaminates are also inferred by extrapolating the large scale bridging models to arbitrarily large specimen widths. The extrapolations also show that the small-scale bridging intrinsic toughness increases with increasing vanadium layer thickness.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleAn Investigation of the Effects of Layer Thickness on the Fracture Behavior of Layered NiAl/V Composites
dc.typeJournal Paper
dc.journal.volume121
dc.journal.issue4
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.2812401
dc.journal.fristpage453
dc.journal.lastpage459
dc.identifier.eissn1528-8889
dc.keywordsComposite materials
dc.keywordsFracture (Process)
dc.keywordsThickness
dc.keywordsToughness
dc.keywordsElectrical resistance
dc.keywordsShear (Mechanics)
dc.keywordsFinite element methods
dc.keywordsFinite element analysis
dc.keywordsFracture toughness AND Steady state
dc.treeJournal of Engineering Materials and Technology:;1999:;volume( 121 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record