Show simple item record

dc.contributor.authorM. W. Ellis
dc.contributor.authorW. J. Wepfer
dc.date.accessioned2017-05-08T23:59:28Z
dc.date.available2017-05-08T23:59:28Z
dc.date.copyrightMarch, 1999
dc.date.issued1999
dc.identifier.issn0195-0738
dc.identifier.otherJERTD2-26480#51_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/122075
dc.description.abstractSolid sorption heat pumps can improve the effectiveness with which energy resources are used for heating and cooling. These systems operate by alternately heating and cooling beds of adsorbent material to produce a flow of refrigerant. The research presented here evaluates the effects of adsorbent thermal conductivity and permeability on the performance of a thermal wave solid sorption heat pump. In order to evaluate these effects, a numerical model of the thermal wave heat pump is developed. This model incorporates not only the effects of the conductivity and permeability, but also the effects of the adsorption equilibrium properties, refrigerant properties, application parameters, operating parameters, and bed geometry. For a typical air conditioning application, the model is used to study the influence of conductivity and permeability on the COP for systems using ammonia as a refrigerant. The results indicate that for the geometry considered, increasing the thermal conductivity of the adsorbent to 1 W/m-K can improve the COP to approximately 0.75. Further increases in conductivity do not yield improved performance. Furthermore, the reduced permeability associated with high conductivity adsorbents can impair vapor flow and lead to decreased performance.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleEffects of Adsorbent Conductivity and Permeability on the Performance of a Solid Sorption Heat Pump
dc.typeJournal Paper
dc.journal.volume121
dc.journal.issue1
dc.journal.titleJournal of Energy Resources Technology
dc.identifier.doi10.1115/1.2795060
dc.journal.fristpage51
dc.journal.lastpage59
dc.identifier.eissn1528-8994
dc.keywordsPermeability
dc.keywordsSorption
dc.keywordsConductivity
dc.keywordsHeat pumps
dc.keywordsRefrigerants
dc.keywordsGeometry
dc.keywordsHeating and cooling
dc.keywordsThermal conductivity
dc.keywordsWaves
dc.keywordsFlow (Dynamics)
dc.keywordsVapors
dc.keywordsAir conditioning
dc.keywordsComputer simulation
dc.keywordsEquilibrium (Physics) AND Energy resources
dc.treeJournal of Energy Resources Technology:;1999:;volume( 121 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record