Show simple item record

dc.contributor.authorM. S. Delpassand
dc.date.accessioned2017-05-08T23:59:27Z
dc.date.available2017-05-08T23:59:27Z
dc.date.copyrightJune, 1999
dc.date.issued1999
dc.identifier.issn0195-0738
dc.identifier.otherJERTD2-26482#110_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/122062
dc.description.abstractThe power section of a positive displacement drill motor (PDM) consists of a steel rotor and a tube with a molded elastomeric lining (stator). Power section failures are typically due to the failure of the stator elastomer. Stator life depends on many factors such as design, materials of construction, and downhole operating conditions. This paper focuses on the stator failure mechanisms and factors affecting stator life. An analytical method for predicting the effect of various design and operating parameters on the strain state and heat build-up within elastomers is discussed. The effect of parameters such as rotor/stator design, downhole temperature, drilling fluid, stator elastomer properties, motor speed, and motor differential pressure on the stator life is discussed. Nonlinear finite element analysis is used to perform thermal and structural analysis on the stator elastomer. Data from laboratory accelerated life tests on power section stators is presented to demonstrate the effect of operating conditions on stator life.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleStator Life of a Positive Displacement Downhole Drilling Motor
dc.typeJournal Paper
dc.journal.volume121
dc.journal.issue2
dc.journal.titleJournal of Energy Resources Technology
dc.identifier.doi10.1115/1.2795065
dc.journal.fristpage110
dc.journal.lastpage116
dc.identifier.eissn1528-8994
dc.keywordsEngines
dc.keywordsDrilling
dc.keywordsDisplacement
dc.keywordsStators
dc.keywordsElastomers
dc.keywordsDesign
dc.keywordsRotors
dc.keywordsFailure
dc.keywordsLife testing
dc.keywordsPulse width modulation
dc.keywordsFailure mechanisms
dc.keywordsFinite element analysis
dc.keywordsConstruction
dc.keywordsLinings (Textiles)
dc.keywordsDrills (Tools)
dc.keywordsPressure
dc.keywordsHeat
dc.keywordsTemperature
dc.keywordsFluids
dc.keywordsStructural analysis AND Steel
dc.treeJournal of Energy Resources Technology:;1999:;volume( 121 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record