Show simple item record

dc.contributor.authorJ. M. Dinis
dc.contributor.authorA. K. Wojtanowicz
dc.contributor.authorS. L. Scott
dc.date.accessioned2017-05-08T23:59:25Z
dc.date.available2017-05-08T23:59:25Z
dc.date.copyrightSeptember, 1999
dc.date.issued1999
dc.identifier.issn0195-0738
dc.identifier.otherJERTD2-26483#161_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/122041
dc.description.abstractThis paper presents a statistical method to detect leaks in subsea liquid flowlines when the inlet flow rate measurements are unavailable and conventional mass balance techniques cannot be used. Presently, the only method used in these situations is to “predict” the inlet rate from a steady-state reservoir/wellbore model for use in a transient pipeline simulator. The purpose of this work was to examine the utility of a pressure loss model which requires only routine production data. This technique is derived from the statistical theory of estimation and testing, and treats fluctuations due to turbulence, transients, and measurement errors as statistical noise. This method compares two mean values of the pipeline resistance coefficient, R; the new updated value representing the potential leak and the old value being R without leak. Precision of the new method was demonstrated using the 9460-ft long, (3.64 in. i.d.) flowloop at LSU, with flowrates up to 10,000 bbl/day of water, and pressures up to 2400 psi. The leak was simulated by an orifice which discharged the water from the flowline into a shut-in-well. An environmental (wellhead) pressure up to 2200 psi was applied to simulate hydrostatic pressure in the deep-sea environment. The results presented in this paper show how detection of small leaks relates to the number of R measurements, leak position, and statistical noise resulting from flow rate-pressure fluctuations, transients, and measurement uncertainties.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleLeak Detection in Liquid Subsea Flowlines With no Recorded Feed Rate
dc.typeJournal Paper
dc.journal.volume121
dc.journal.issue3
dc.journal.titleJournal of Energy Resources Technology
dc.identifier.doi10.1115/1.2795976
dc.journal.fristpage161
dc.journal.lastpage166
dc.identifier.eissn1528-8994
dc.keywordsOcean engineering
dc.keywordsLeakage
dc.keywordsPressure
dc.keywordsFlow (Dynamics)
dc.keywordsMeasurement
dc.keywordsNoise (Sound)
dc.keywordsPipelines
dc.keywordsFluctuations (Physics)
dc.keywordsWater
dc.keywordsSeas
dc.keywordsHydrostatic pressure
dc.keywordsTesting
dc.keywordsAccuracy
dc.keywordsErrors
dc.keywordsSteady state
dc.keywordsTurbulence
dc.keywordsReservoirs AND Electrical resistance
dc.treeJournal of Energy Resources Technology:;1999:;volume( 121 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record