Show simple item record

dc.contributor.authorL. Rosario
dc.contributor.authorM. M. Rahman
dc.date.accessioned2017-05-08T23:59:24Z
dc.date.available2017-05-08T23:59:24Z
dc.date.copyrightDecember, 1999
dc.date.issued1999
dc.identifier.issn0195-0738
dc.identifier.otherJERTD2-26486#247_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/122030
dc.description.abstractThis paper presents the analysis of two-dimensional heat transfer in an annular finned tube assembly during the process of dehumidification. All possible fin surface conditions, namely, dry, fully wet, and partially wet, have been studied and fin efficiency under these conditions have been modeled. Computations have been carried out using a control volume-based finite-difference method and compared with past one-dimensional analytical studies and available experimental data. The parameters that influenced the heat transfer rate in the finned tube structure are ratio of fin and wall thermal conductivities, ratio of fin thickness to fin pitch, ratio of wall thickness to fin pitch, ratio of fin length to fin pitch, cold fiuid Biot number, ambient Blot number, the relative humidity and dry bulb temperature of the incoming air, and the cold fluid temperature inside the coil. It was found that the heat transfer increased with increment in both dry bulb temperature and the relative humidity of the air. The fin efficiency changed rapidly with relative humidity under partially wet condition. The results suggest that coil performance can be very significantly altered by the condensation phenomenon on the fin surface and designs with dry fin data may not be adequate. The present results are expected to be very useful for the design of dehumidifier (cooling) coils for air conditioning applications.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleA Two-Dimensional Numerical Study of Heat Transfer in a Finned Tube Assembly During Axisymmetric Dehumidification
dc.typeJournal Paper
dc.journal.volume121
dc.journal.issue4
dc.journal.titleJournal of Energy Resources Technology
dc.identifier.doi10.1115/1.2795990
dc.journal.fristpage247
dc.journal.lastpage253
dc.identifier.eissn1528-8994
dc.keywordsDehumidification
dc.keywordsManufacturing
dc.keywordsHeat transfer
dc.keywordsTemperature
dc.keywordsCondensation
dc.keywordsCooling
dc.keywordsFluids
dc.keywordsAir conditioning
dc.keywordsDesign
dc.keywordsComputation
dc.keywordsFinite difference methods
dc.keywordsThickness
dc.keywordsWall thickness AND Dehumidifiers
dc.treeJournal of Energy Resources Technology:;1999:;volume( 121 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record