Show simple item record

dc.contributor.authorM. Da Lio
dc.contributor.authorA. Doria
dc.contributor.authorR. Lot
dc.date.accessioned2017-05-08T23:59:19Z
dc.date.available2017-05-08T23:59:19Z
dc.date.copyrightMarch, 1999
dc.date.issued1999
dc.identifier.issn0022-0434
dc.identifier.otherJDSMAA-26252#111_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/121974
dc.description.abstractThis paper deals with the problem of measuring the inertia tensor of rigid bodies. An original approach is adopted, different from classical modal analysis techniques. The rigid body is forced by a spatial mechanism to rotate around different axes. Once the mechanism is calibrated, i.e., its inertia and stiffness matrices are known, the inertia tensor of the rigid body may be determined by measuring the frequencies of the small oscillations around the selected axes and then solving a least-squares identification problem. Two prototypes of the spatial mechanism were built. The first was used to perform tests and to measure the inertia tensor of some compressors for domestic refrigeration. The second was constructed to measure the inertia tensor of large mechanical systems.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleA Spatial Mechanism for the Measurement of the Inertia Tensor: Theory and Experimental Results
dc.typeJournal Paper
dc.journal.volume121
dc.journal.issue1
dc.journal.titleJournal of Dynamic Systems, Measurement, and Control
dc.identifier.doi10.1115/1.2802427
dc.journal.fristpage111
dc.journal.lastpage116
dc.identifier.eissn1528-9028
dc.keywordsInertia (Mechanics)
dc.keywordsTensors
dc.keywordsMechanisms
dc.keywordsRefrigeration
dc.keywordsFrequency
dc.keywordsStiffness
dc.keywordsOscillations
dc.keywordsCompressors AND Engineering prototypes
dc.treeJournal of Dynamic Systems, Measurement, and Control:;1999:;volume( 121 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record